ITEM |
PROBLEM |
PROBABLE REASON |
CORRECTIVE ACTIONS |
| Wash Basins / Table Top | 1. Overflow Chocked And Foul Bed Odor | Waste Coupling Used May Be Full Threaded | Waste Coupling Should Be Changed To Slot Cut Coupling |
|---|---|---|---|
| 2. Water Deposit On Tap Platform Area And Inside Bowl Area | Basin Is Not Fixed In Level Or Bracket Is Not In Level | Should Be Done By Proper Leveling | |
| 3. There Is No Tap Hole In Basin | Tap Hole Gould Be Semi Punched From Back Side | Tap Hole Should Be Created By Plumber From Semipunched Area | |
| Ewc Pan / Anglo Indian | 1. Water Not Coming In Bowl Area While Flushing | Flush Bend Is Not Inserted Up To The End Of Inlet Hole | Insert The Flush Pipe Up To The End Of Inlet ( For Pan Closet: Check Whether Flush Pipe Is Not Covering Flush Hole Which Is In Both Side Of Inlet Wall |
| Closet / Pan May Be Not Leveled | Should Be Done By Proper Leveling | ||
| One Piece Closet | 1. Water Not Coming In Bowl Area While Flushing | Mechanism Inside Tank Could Not Worldng Properly | Change The Centre Pump Of Mechanism |
| There Is No Water In Flush Tank | Increase The Ball Cock Height To The Max Level | ||
| 2. Water Is Continuously Leaking Inside The Bowl | Mechanism Inside Tank Could Not Working Properly | Change The Centre Pump Of Mechanism | |
| 3. Water Quantity Insufficient For Effective Flushing | Ball Cock Height Adjusted At Lower Level | Increase The Ball Cock Height To The Max Level | |
| 4. Uneven Flow Of Water From Bith Side Of Closet | Closet Is Not Leveled Properly | Closet Should Be In Proper Level | |
| Wallhung Water Closet | 1. Water Not Coming In Bowl Area While Flushing | Flush Valve May Not Working Properly / Concealed Cistern Is Not Working Properly | Should Change Flush Valve / Concealed Cistern |
| Flush Pipe Is Not Inserted Up To The End Of Inlet Hole | Insert The Flush Pipe Up To The End Of Inlet | ||
| 2. Water Is Continuously Leaking Inside The Bowl | Closet Is Not Leveled Properly | Closet Should Be In Proper Level | |
| 3. Water Quantity Insufficient For Effective Flushing | Connection Between Closet Outlet And Drainage Pipe Is Not Proper | Should Be Done By Proper Connection By Experienced Plumber | |
| Couple Closet (2 Pcs Closet) |
1. Uneven Flow Of Water From Both Side Of Closet Bowl | Both Arm Of Diverter Pipe Not Inserted Equally In Both Side Of The Closet | Both Arm Of Diverter Pipe Should Be Inserted Equally In Both Side Of The Closet |
| 2. Water Is Leaking Between The Cistern And Closet | Diverter Pipe Not Fixed Properly in The Outlet Of Cistern | Diverter Pipe Should Be Fixed Properly In The Outlet Of Cistern | |
| Rubber Ring Containing Bolt Is Not Tightened Properly | Rubber Ring Containing Bolt Should Be Tightened Properly |